GE repair
GE washer repair in Broward County
Won't drain, won't spin, or shakes across the floor. Top-load and front-load washers from every major brand.
- Owner-operated
- Insured
- All major brands
Common problems
Sound familiar?
These are the washer problems David sees most often in Broward County, and what usually causes them.
Washer fills but won't spin
The GE shift actuator, which switches between agitate and spin, is worn or its sensor has failed. David replaces the actuator.
Tub full of standing water
A jammed GE drain pump or a debris-blocked pump filter stops the drain cycle. David clears the blockage or replaces the pump.
Won't fill or fills slowly
The GE water inlet valve is clogged with hard-water scale, or its solenoid has burned out. David replaces the valve.
Lid lock light flashing
A failed GE lid lock/switch assembly stops the cycle before spin. David installs a new lid lock.
Agitates but won't spin
A worn shift actuator or a stripped drive coupling leaves GE washers agitating without spinning. David finds which part failed and fixes it.
Walks or bangs on spin
Stretched or broken GE suspension rods let the tub swing hard. David replaces all four rods so it rides balanced.
Dead panel, no lights
A surge-damaged GE control board or a loose power connection kills the display. David tests the board and restores power.
Loud grinding on spin
A failing GE drive motor or a worn tub bearing grinds under load. David pinpoints the source and repairs it.
Stops mid-cycle repeatedly
An intermittent GE control board or a loose lid-switch harness pauses the cycle. David traces the fault and fixes it.
Clothes soaking wet after spin
A weak drain pump or a slipping shift actuator leaves GE loads dripping. David restores full spin and drainage.
Sound like yours?
Tell David what your washer is doing
Why it breaks
What actually goes wrong
GE washers have their own trouble spots: the shift actuator that switches between spin and agitate, the drain pump that clogs in Broward's hard water, and the lid lock that locks you out of a full tub.
Broward's hard water clogs the GE inlet valve with scale and cakes the drain pump, while lint and coins jam the pump filter. Heat and humidity break down the lid-lock plastic and dry out the suspension rods. Power surges fry the control board, and on top-loaders the shift actuator wears out from thousands of agitate-to-spin cycles.
What David checks
- Shift actuator
- Drain pump
- Water inlet valve
- Lid lock switch
- Drive motor
- Suspension rods
- Main control board
- Drive coupling
- Pump filter
Honest diagnosis
David explains what failed
Reviews
What customers say about David
Highly recommend! He was incredibly responsive and reliable, and was able to come out quickly to fix my dishwasher. He clearly explained the issue and walked me through the repair process so I understood exactly what was going on. What really stood out was that he went above and beyond by giving me helpful tips on ongoing maintenance for my other appliances to help prevent future problems. Honest, knowledgeable, and professional. I wouldn’t hesitate to call him again.
I can’t thank David enough for fixing my oven. My neighbor recommended him, and I’m so glad they did. He was quick to respond, explained exactly what was going on, ordered the parts, and got everything working again. Reliable, easy to work with, and clearly knows what he’s doing. Highly recommend.
David was on time, friendly, professional and knowledgeable. He knew exactly how to fix the burner on our stovetop, and gave us some helpful advice for the future.
Other GE appliances
FAQ
Common questions about washer repair
My GE washer fills but won't spin. What's wrong?
On GE top-loaders, that's almost always the shift actuator, the part that switches the transmission between agitate and spin.
Do you fix both GE top-load and front-load washers?
Yes. David repairs both, from shift-actuator and drain-pump issues on top-loaders to lid-lock, inlet-valve, and control-board faults across GE's lineup.
Who actually comes to my home?
David, the owner of Boroshno Appliance Repair. He answers his own phone, comes to your home and does the repair himself. There is no call center and no rotating crew.
What appliances do you repair?
Refrigerators, freezers, washers, dryers, ovens, ranges, cooktops, dishwashers and ice machines. That includes built-in and pro-style units and commercial equipment like walk-in coolers, reach-in refrigeration and commercial ice machines.
Service area
16 Broward County cities
David is based in Fort Lauderdale and works in the cities below. Not sure if you're in range? Call and ask.
Request a repair
Get your washer looked at
Leave your name and number and David will call you back to set up a visit. In a hurry? Calling is the fastest way to reach him.
(954) 895-54599 AM to 6 PM, five days a week
5.0Based on Google Reviews