GE repair
GE dishwasher repair in Broward County
Standing water, leaks, dirty dishes or a blinking error code. Built-in and drawer dishwashers from every major brand.
- Owner-operated
- Insured
- All major brands
Common problems
Sound familiar?
These are the dishwasher problems David sees most often in Broward County, and what usually causes them.
Standing water in the tub
It's usually a jammed GE drain pump or a blocked check valve; David clears the blockage or replaces the pump.
Dishes still gritty after a cycle
The GE wash motor or circulation pump has lost pressure, or the chopper is clogged; David restores spray-arm flow.
Panel blinks, won't start
It's often a failed door latch switch, or a control board that doesn't register the door as closed; David finds the fault and repairs it.
Water leaking onto the floor
A torn door gasket, a cracked sump, or a stuck float switch can trigger Active Flood Protection; David finds and seals the leak.
Won't fill with water
The GE water inlet valve is stuck closed or scaled shut by Broward's hard water; David replaces the valve.
Dishes come out wet
The heating element for GE's heated dry has burned out, or the high-limit thermostat has failed; David tests both and replaces the failed part.
Detergent cup won't open
The wax motor in the GE detergent dispenser has failed, so soap stays trapped; David swaps the dispenser assembly.
Loud grinding or humming
It's usually debris in the GE chopper or a worn wash-motor bearing; David pulls the sump and clears or rebuilds it.
Buttons don't respond
Either Control Lock is engaged, or the touch panel ribbon on the GE control board has failed; David gets the controls working again.
Stops mid-cycle
A weak drain pump, a tripped float, or a failing control board interrupts the wash; David finds the fault and fixes it.
Sound like yours?
Tell David what your dishwasher is doing
Why it breaks
What actually goes wrong
GE dishwashers fail in patterns David knows cold: a seized wash motor that hums but won't spray, a clogged drain pump leaving inches of water, or Active Flood Protection tripping and running the pump nonstop.
Broward's hard water is the biggest culprit: mineral scale locks up the GE inlet valve, coats the heating element, and stiffens the float switch until it sticks. Grease and food debris jam the drain pump and chopper. Power surges stress the control board and wash-motor windings, while door latches and gaskets simply wear out.
What David checks
- Drain pump
- Wash motor
- Water inlet valve
- Float switch
- Door latch
- Heating element
- Detergent dispenser
- Control board
- Chopper & sump
Honest diagnosis
David explains what failed
Reviews
What customers say about David
Highly recommend! He was incredibly responsive and reliable, and was able to come out quickly to fix my dishwasher. He clearly explained the issue and walked me through the repair process so I understood exactly what was going on. What really stood out was that he went above and beyond by giving me helpful tips on ongoing maintenance for my other appliances to help prevent future problems. Honest, knowledgeable, and professional. I wouldn’t hesitate to call him again.
David came by to fix my dishwasher and did an awesome job. It had been leaking and not draining for weeks and thanks to him it’s working perfectly now. He explained in a simple way, fixed it quickly and was very honest about it. I am glad my friend recommended him. If any of your appliances are giving you trouble, just call David
I can’t thank David enough for fixing my oven. My neighbor recommended him, and I’m so glad they did. He was quick to respond, explained exactly what was going on, ordered the parts, and got everything working again. Reliable, easy to work with, and clearly knows what he’s doing. Highly recommend.
Other GE appliances
FAQ
Common questions about dishwasher repair
My GE dishwasher's Clean light or panel just blinks, and it won't start. What's wrong?
On GE dishwashers, that usually means the door latch switch isn't detecting that the door is shut, or the control board isn't reading the switch.
Why are my dishes still dirty after a full cycle?
The GE wash motor has likely lost pressure, or the chopper and spray arms are clogged. David restores full wash flow. If a repair isn't worth it, he'll tell you honestly, with no upsell.
Do you service my GE model in Broward County?
David repairs GE dishwashers in 16 Broward County cities, including Fort Lauderdale, Coral Springs, Pembroke Pines, and Deerfield Beach.
My dishes are soaking wet at the end of the cycle. Is that fixable?
Yes. That's usually a burned-out heating element or a failed thermostat in the heated-dry system.
Service area
16 Broward County cities
David is based in Fort Lauderdale and works in the cities below. Not sure if you're in range? Call and ask.
Request a repair
Get your dishwasher looked at
Leave your name and number and David will call you back to set up a visit. In a hurry? Calling is the fastest way to reach him.
(954) 895-54599 AM to 6 PM, five days a week
5.0Based on Google Reviews