GE repair
GE dryer repair in Broward County
No heat, loud tumbling, or clothes still damp after a full cycle. Gas and electric dryers, diagnosed honestly.
- Owner-operated
- Insured
- All major brands
Common problems
Sound familiar?
These are the dryer problems David sees most often in Broward County, and what usually causes them.
Runs but no heat
The GE heating element has burned out; David tests it and replaces the element so your clothes dry again.
Clothes still damp after a cycle
A blown thermal cutoff or a faulty cycling thermostat kills the heat mid-cycle; David replaces the failed part and clears the airflow.
Drum won't turn
The GE drum belt has snapped or slipped off the idler pulley; David installs a new belt and pulley.
Loud thumping or grinding
A worn drum bearing or a seized idler pulley makes that rumble; David replaces the bearing kit to stop it.
Takes two or three cycles to dry
A clogged vent or a worn blower wheel starves the dryer of airflow; David clears the vent run and replaces the blower wheel.
Dryer won't start at all
A failed door switch, thermal fuse, or start button breaks the circuit; David traces the fault and restores power.
Weak or no airflow at the vent
A cracked blower wheel or a lint-packed duct chokes the exhaust; David cleans the vent path and replaces the wheel.
Heats, then quits partway
An intermittent cycling thermostat or a faulty high-limit thermostat cuts out under load; David tests both and replaces the one that failed.
Squealing on startup
A dry idler pulley bearing or a glazed drum belt squeals as it warms up; David replaces both parts.
Sound like yours?
Tell David what your dryer is doing
Why it breaks
What actually goes wrong
Most GE dryer failures trace back to airflow and heat. A restricted vent traps hot air, which trips the thermal cutoff and burns out the heating element early. Broward's humidity makes dryers work harder, so belts, idler pulleys, and drum bearings wear faster. Years of lint packed around the heating element kill the heat and create a fire risk, which David checks on every visit.
What David checks
- Heating element
- Thermal cutoff & fuse
- Cycling thermostat
- Drum belt
- Idler pulley
- Blower wheel
- Drum bearing
- Door switch
- Vent & exhaust duct
Honest diagnosis
David explains what failed
Reviews
What customers say about David
Highly recommend! He was incredibly responsive and reliable, and was able to come out quickly to fix my dishwasher. He clearly explained the issue and walked me through the repair process so I understood exactly what was going on. What really stood out was that he went above and beyond by giving me helpful tips on ongoing maintenance for my other appliances to help prevent future problems. Honest, knowledgeable, and professional. I wouldn’t hesitate to call him again.
I can’t thank David enough for fixing my oven. My neighbor recommended him, and I’m so glad they did. He was quick to respond, explained exactly what was going on, ordered the parts, and got everything working again. Reliable, easy to work with, and clearly knows what he’s doing. Highly recommend.
David was on time, friendly, professional and knowledgeable. He knew exactly how to fix the burner on our stovetop, and gave us some helpful advice for the future.
Other GE appliances
FAQ
Common questions about dryer repair
My GE dryer runs but won't heat. What's wrong?
It's usually a burned-out heating element or a thermal cutoff tripped by a clogged vent.
Why is my GE dryer so loud?
The common culprits are a worn drum bearing, a snapped or misaligned belt, or a dry idler pulley.
My GE dryer takes forever to dry. Is that fixable?
Almost always. It's usually a clogged vent or a failing blower wheel choking airflow.
Do you diagnose the actual failed part, or upsell parts I don't need?
David diagnoses the part that actually failed, with no upselling.
Service area
16 Broward County cities
David is based in Fort Lauderdale and works in the cities below. Not sure if you're in range? Call and ask.
Request a repair
Get your dryer looked at
Leave your name and number and David will call you back to set up a visit. In a hurry? Calling is the fastest way to reach him.
(954) 895-54599 AM to 6 PM, five days a week
5.0Based on Google Reviews