GE repair
GE refrigerator repair in Broward County
Warm fridge, frosted freezer, or an ice maker that quit. David finds the real cause, explains what failed and walks you through the repair.
- Owner-operated
- Insured
- All major brands
Common problems
Sound familiar?
These are the refrigerator problems David sees most often in Broward County, and what usually causes them.
Ice maker stopped making ice
This is the classic GE fault: a failed ice maker module or feeler arm. David replaces the assembly and checks that it makes ice again.
No water or ice from the dispenser
It's usually a clogged or dead water inlet valve, or a frozen fill tube. David clears the tube or replaces the valve.
Fresh-food side warming up
It's often a failed evaporator fan motor, or a defrost sensor that lets frost build over the coil. David restores the airflow.
Fridge quit cooling completely
When the GE main control board fails, the compressor and the defrost system can stop cycling. David tests the board and replaces it.
Loud buzzing or clicking from the back
A worn evaporator or condenser fan blade hitting ice, or a bad fan motor, causes the noise. David repairs the fan.
Water pooling under the crisper drawers
A frozen or clogged defrost drain is very common on GE French-door units. David thaws the drain line and clears it.
Leaking water onto the floor
The usual causes are a cracked water line, a split inlet valve, or an overflowing drain pan. David traces the leak and seals it.
Compressor runs but never gets cold
It's a sealed-system or refrigerant issue, or a stuck defrost cycle. David confirms whether the sealed system is at fault.
Ice building up on the back wall
A failed defrost heater or defrost thermostat leaves frost on the evaporator. David restores the defrost cycle.
Control panel dark or unresponsive
A failed dispenser board or main board cuts power to the display. David tests both boards and gets the display working again.
Sound like yours?
Tell David what your refrigerator is doing
Why it breaks
What actually goes wrong
GE refrigerators fail in predictable ways: the ice maker stops filling, the main defrost board flakes out, or the evaporator fan seizes and the fresh-food side slowly warms up. David handles GE refrigerator repair for homeowners in Broward County.
GE ice makers and inlet valves wear out, and the ice maker module and feeler arm are the number-one failure points. Broward's hard water scales up the valve and fill tube, choking the water flow, while summer heat overworks the compressor and defrost system. Power surges from afternoon storms knock out the main control board, and a worn defrost heater or thermostat leaves frost on the coil.
What David checks
- Icemaker module
- Water inlet valve
- Main control board
- Evaporator fan motor
- Defrost heater
- Defrost thermostat
- Dispenser board
- Sealed system
- Defrost drain line
Honest diagnosis
David explains what failed
Reviews
What customers say about David
David was able to come the same day to fix my fridge water dispenser and made it easy. Friendly, honest, and efficient. Explained the issue and had it working in no time. Highly recommend.
Highly recommend! He was incredibly responsive and reliable, and was able to come out quickly to fix my dishwasher. He clearly explained the issue and walked me through the repair process so I understood exactly what was going on. What really stood out was that he went above and beyond by giving me helpful tips on ongoing maintenance for my other appliances to help prevent future problems. Honest, knowledgeable, and professional. I wouldn’t hesitate to call him again.
I can’t thank David enough for fixing my oven. My neighbor recommended him, and I’m so glad they did. He was quick to respond, explained exactly what was going on, ordered the parts, and got everything working again. Reliable, easy to work with, and clearly knows what he’s doing. Highly recommend.
Other GE appliances
FAQ
Common questions about refrigerator repair
Why did my GE ice maker stop making ice?
On GE fridges, it's almost always the ice maker module or feeler arm. Sometimes it's a clogged water inlet valve or a frozen fill tube.
Do you repair GE French-door and Profile models?
Yes. David handles GE refrigerator repair on French-door, Profile, Café, side-by-side, and top-freezer models in 16 Broward County cities, including Hollywood and Parkland.
My GE fridge isn't cooling, but the light works. What's wrong?
It's usually the evaporator fan, the defrost system, or the main control board, not a power problem. David tests each one on site and, in most cases, gets the fridge cooling again.
Service area
16 Broward County cities
David is based in Fort Lauderdale and works in the cities below. Not sure if you're in range? Call and ask.
Request a repair
Get your refrigerator looked at
Leave your name and number and David will call you back to set up a visit. In a hurry? Calling is the fastest way to reach him.
(954) 895-54599 AM to 6 PM, five days a week
5.0Based on Google Reviews