Whirlpool repair
Whirlpool washer repair in Broward County
Won't drain, won't spin, or shakes across the floor. Top-load and front-load washers from every major brand.
- Owner-operated
- Insured
- All major brands
Common problems
Sound familiar?
These are the washer problems David sees most often in Broward County, and what usually causes them.
Won't drain, water sits
It's usually a clogged drain pump filter or a failed drain pump, which triggers F21 or F9E1. David clears the filter or replaces the pump.
F21 or F9E1 code flashing
It's Whirlpool's long-drain fault, almost always a blocked filter, a kinked hose, or a worn drain pump. David fixes the cause.
Won't spin or agitate
On top-load Cabrios, it's often a worn motor coupler or a failed shift actuator. David replaces the part that failed.
F5E3 lid lock error
The lid lock won't release, so the lid stays locked. The cause is usually the lock assembly or its wiring. David tests both and replaces what failed.
Too many suds, Sud error
Sud or Sd means excess detergent or a slow drain; David checks the drain pump and clears the suds.
F8E1 long fill error
Hard water clogs the inlet screens or damages the water inlet valve, so water flows in slowly. David restores normal filling.
F7E1 motor speed fault
It's a drive motor or speed-sensor problem on Duet front-loaders. David tests the motor and the control board.
Loud grinding while spinning
A worn tub bearing or a failing motor coupler causes that roar or grinding; David inspects both and replaces the worn part.
Won't turn on at all
It's often a tripped outlet, a failed main control board, or a bad door switch after a power surge. David tracks down which one it is.
Leaking water onto floor
It's usually a cracked drain hose, a worn door boot, or a leaking drain-pump seal. David traces the source and seals it.
Sound like yours?
Tell David what your washer is doing
Why it breaks
What actually goes wrong
A dead Whirlpool washer means wet laundry, a flooded floor, and a basket that never empties. Whether it's a Cabrio or a Duet, David has seen every F21 drain code, worn motor coupler, and stuck lid lock.
Whirlpool washers fail in predictable ways: motor couplers crack on top-load Cabrios, shift actuators give out, and tub bearings wear down. Hard water clogs pump filters and inlet screens, humidity rusts parts, and power surges fry control boards. Front-load Duets see door-boot leaks and F21 drain faults. The good news: most repairs come down to a single part.
What David checks
- Drain pump & filter
- Motor coupler
- Shift actuator
- Lid lock assembly
- Tub bearing
- Door boot seal
- Water inlet valve
- Main control board
- Drive motor
Honest diagnosis
David explains what failed
Reviews
What customers say about David
Highly recommend! He was incredibly responsive and reliable, and was able to come out quickly to fix my dishwasher. He clearly explained the issue and walked me through the repair process so I understood exactly what was going on. What really stood out was that he went above and beyond by giving me helpful tips on ongoing maintenance for my other appliances to help prevent future problems. Honest, knowledgeable, and professional. I wouldn’t hesitate to call him again.
I can’t thank David enough for fixing my oven. My neighbor recommended him, and I’m so glad they did. He was quick to respond, explained exactly what was going on, ordered the parts, and got everything working again. Reliable, easy to work with, and clearly knows what he’s doing. Highly recommend.
David was on time, friendly, professional and knowledgeable. He knew exactly how to fix the burner on our stovetop, and gave us some helpful advice for the future.
Other Whirlpool appliances
FAQ
Common questions about washer repair
What does the F21 code mean on my Whirlpool washer?
F21 is a long-drain fault, almost always caused by a clogged pump filter, a kinked drain hose, or a worn drain pump. David clears the blockage or replaces the pump.
Do you fix both Cabrio top-loaders and Duet front-loaders?
Yes. David works on every Whirlpool washer line, from Cabrio motor couplers and shift actuators to Duet door boots, drain pumps, and F7E1 motor faults.
My Whirlpool washer shows F5E3 and the lid stays locked. Can it be fixed?
Yes. F5E3 means the lid lock won't release, usually because of a failed lock assembly or its wiring. David tests both and replaces what failed, so you can get back to your laundry.
Why won't my Whirlpool washer spin or drain?
It's commonly a clogged filter, a worn motor coupler, or a failed drain pump. David diagnoses the problem, and most repairs come down to a single part.
Service area
16 Broward County cities
David is based in Fort Lauderdale and works in the cities below. Not sure if you're in range? Call and ask.
Request a repair
Get your washer looked at
Leave your name and number and David will call you back to set up a visit. In a hurry? Calling is the fastest way to reach him.
(954) 895-54599 AM to 6 PM, five days a week
5.0Based on Google Reviews