Whirlpool repair
Whirlpool dryer repair in Broward County
No heat, loud tumbling, or clothes still damp after a full cycle. Gas and electric dryers, diagnosed honestly.
- Owner-operated
- Insured
- All major brands
Common problems
Sound familiar?
These are the dryer problems David sees most often in Broward County, and what usually causes them.
Tumbles but no heat
The thermal fuse blows on overheating, the number-one Whirlpool no-heat cause. David tests and replaces it.
Loud thumping while turning
A cracked or stretched drum belt slaps the housing; David swaps the Whirlpool belt so the drum turns quietly again.
Drum won't spin at all
The motor runs, but a snapped drum belt can't turn the drum. David installs the correct Whirlpool belt.
High-pitched squeal on spin
Worn drum support rollers or a dry idler pulley scream under load; David replaces both to silence it.
Heats then quits mid-cycle
A failing cycling thermostat or high-limit thermostat cuts the heat early; David tests and replaces it.
Electric model stays cold
A burned-out heating element coil means no heat on electric Whirlpools; David tests the element and installs a new one.
Gas model won't ignite
A weak or cracked gas igniter won't glow to light the burner; David replaces the Whirlpool igniter.
Clothes damp, long cycles
A clogged vent or lint-choked duct traps moisture and heat; David clears the vent line so cycles finish properly.
Dryer won't start
A failed door switch or start switch stops the cycle; David tests both switches and gets the dryer running again.
Overheats and shuts down
A restricted airflow path trips the high-limit thermostat repeatedly; David finds the blockage and fixes it.
Sound like yours?
Tell David what your dryer is doing
Why it breaks
What actually goes wrong
Whirlpool dryers fail in a handful of predictable ways, and David has seen every one of them. A blown thermal fuse kills the heat, a worn drum belt makes the drum noisy or stops it from turning, and tired rollers and an idler pulley set off that metal squeal.
Most Whirlpool dryer repair calls trace back to restricted airflow. Heat and vibration crack the drum belt and wear the rollers and idler pulley, while gas igniters and thermostats wear out over time.
What David checks
- Thermal fuse
- Drum belt
- Support rollers
- Idler pulley
- Heating element
- Gas igniter
- Cycling thermostat
- High-limit thermostat
- Vent & duct
Honest diagnosis
David explains what failed
Reviews
What customers say about David
Highly recommend! He was incredibly responsive and reliable, and was able to come out quickly to fix my dishwasher. He clearly explained the issue and walked me through the repair process so I understood exactly what was going on. What really stood out was that he went above and beyond by giving me helpful tips on ongoing maintenance for my other appliances to help prevent future problems. Honest, knowledgeable, and professional. I wouldn’t hesitate to call him again.
I can’t thank David enough for fixing my oven. My neighbor recommended him, and I’m so glad they did. He was quick to respond, explained exactly what was going on, ordered the parts, and got everything working again. Reliable, easy to work with, and clearly knows what he’s doing. Highly recommend.
David was on time, friendly, professional and knowledgeable. He knew exactly how to fix the burner on our stovetop, and gave us some helpful advice for the future.
Other Whirlpool appliances
FAQ
Common questions about dryer repair
Why does my Whirlpool dryer spin but not heat?
On Whirlpool dryers, this is almost always a blown thermal fuse, usually caused by a clogged vent. Sometimes it's the heating element or a thermostat.
What's the loud thumping or squealing noise?
Thumping is typically a worn drum belt; a squeal points to the drum support rollers or idler pulley.
Can you fix both gas and electric Whirlpool dryers?
Yes. David repairs electric models (heating element, fuse) and gas models (igniter, burner) in Broward County.
Is it worth repairing my Whirlpool dryer?
Usually yes. A fuse, belt, or roller repair is far cheaper than replacing the unit. David gives an honest assessment of whether it's worth fixing, with no upsell.
Service area
16 Broward County cities
David is based in Fort Lauderdale and works in the cities below. Not sure if you're in range? Call and ask.
Request a repair
Get your dryer looked at
Leave your name and number and David will call you back to set up a visit. In a hurry? Calling is the fastest way to reach him.
(954) 895-54599 AM to 6 PM, five days a week
5.0Based on Google Reviews