LG repair
LG washer repair in Broward County
Won't drain, won't spin, or shakes across the floor. Top-load and front-load washers from every major brand.
- Owner-operated
- Insured
- All major brands
Common problems
Sound familiar?
These are the washer problems David sees most often in Broward County, and what usually causes them.
UE code, won't spin
UE means an unbalanced load. If the washer is level and the load is spread out but UE keeps coming back, David checks the shock absorbers, suspension rods, and rotor position sensor.
OE code, water won't drain
OE points to a clogged drain pump or blocked filter; David clears the impeller and pump so it drains again.
IE code, won't fill
IE flags a fill fault; David tests the inlet valves, water lines, and pressure sensor, then replaces the part that failed.
dE code, door won't lock
dE is a door-lock error; David replaces the front-load door latch or interlock switch so the cycle starts.
LE code, motor locked
LE signals a locked rotor or stator fault on the Direct Drive motor; David inspects the Hall sensor and motor.
Loud grinding on spin
Grinding usually means a worn tub bearing; David pulls the drum and presses in a new bearing and seal.
Leaking from the door
Front-load leaks trace to a torn door boot or damaged gasket; David fits a new door seal.
Musty smell in drum
Mold in the door boot folds and detergent drawer causes the odor; David cleans the boot, drain path, and gasket.
Clothes soaking wet
Poor spin often means a failing rotor position sensor or drain pump; David checks the Direct Drive motor and pump.
Washer won't power on
A dead panel points to the main control board or a bad outlet; David tests the power supply and replaces the board if it has failed.
Sound like yours?
Tell David what your washer is doing
Why it breaks
What actually goes wrong
LG washers are built around a Direct Drive motor and rotor position sensor. A UE code most often means the load is off balance or the washer isn't level, and an LE code means the motor can't turn the drum. When a code keeps coming back after those simple checks, David tracks down the specific part behind it. That's why these LG washers need a precise diagnosis.
Broward's hard water leaves mineral scale in LG inlet valves and drain pumps, causing IE and OE codes. Summer heat and power surges stress the main control board and Direct Drive stator. Worn suspension rods and overloaded drums trigger UE errors, while trapped moisture in the front-load door boot breeds the mold that causes musty odors and gasket leaks.
What David checks
- Direct Drive motor
- Rotor position sensor
- Drain pump & filter
- Door lock latch
- Inlet water valves
- Tub bearing & seal
- Main control board
- Door boot gasket
- Suspension rods
Honest diagnosis
David explains what failed
Reviews
What customers say about David
Highly recommend! He was incredibly responsive and reliable, and was able to come out quickly to fix my dishwasher. He clearly explained the issue and walked me through the repair process so I understood exactly what was going on. What really stood out was that he went above and beyond by giving me helpful tips on ongoing maintenance for my other appliances to help prevent future problems. Honest, knowledgeable, and professional. I wouldn’t hesitate to call him again.
I can’t thank David enough for fixing my oven. My neighbor recommended him, and I’m so glad they did. He was quick to respond, explained exactly what was going on, ordered the parts, and got everything working again. Reliable, easy to work with, and clearly knows what he’s doing. Highly recommend.
David was on time, friendly, professional and knowledgeable. He knew exactly how to fix the burner on our stovetop, and gave us some helpful advice for the future.
Other LG appliances
FAQ
Common questions about washer repair
Why does my LG washer keep showing UE and stopping?
UE means the load is unbalanced. Often it's a heavy item bunched to one side, a load that is too big or too small, or a washer that isn't level. If the washer is level and UE still repeats, worn shock absorbers, suspension rods, or the rotor position sensor can be the cause.
Do you repair both LG front-load and top-load washers?
Yes. David handles LG washer repair on both front-load and top-load Direct Drive models, including IE, dE, LE, and tub bearing jobs.
How do I get rid of the moldy smell in my LG front-loader?
The odor comes from mold trapped in the door boot folds and drain path. David cleans the gasket, drawer, and pump, and replaces the boot if it's torn, so your laundry smells clean again.
Service area
16 Broward County cities
David is based in Fort Lauderdale and works in the cities below. Not sure if you're in range? Call and ask.
Request a repair
Get your washer looked at
Leave your name and number and David will call you back to set up a visit. In a hurry? Calling is the fastest way to reach him.
(954) 895-54599 AM to 6 PM, five days a week
5.0Based on Google Reviews