KitchenAid repair
KitchenAid refrigerator repair in Broward County
Warm fridge, frosted freezer, or an ice maker that quit. David finds the real cause, explains what failed and walks you through the repair.
- Owner-operated
- Insured
- All major brands
Common problems
Sound familiar?
These are the refrigerator problems David sees most often in Broward County, and what usually causes them.
Ice maker stopped making ice
On KitchenAid models, the usual cause is the ice-maker module, the optic sensor, or the fill tube; David rebuilds or replaces the failed part.
Fridge warm, freezer cold
A classic KitchenAid evaporator fan motor or damper failure starves the fresh-food side of cold air; David replaces the fan or damper.
Frost building up in the freezer
A failed defrost heater, bimetal, or control board lets frost cover the coils; David replaces the bad part.
Water pooling under drawers
A frozen defrost drain or a split water line leaves water pooling under the KitchenAid drawers; David clears the drain.
Refrigerator not cooling at all
It's often a failed main control board or compressor start relay; David tests both and confirms whether the sealed system is involved.
Loud buzzing or clicking
A worn evaporator or condenser fan blade, or a clicking compressor relay, causes the noise; David pinpoints the part and replaces it.
Water dispenser not working
A failed KitchenAid water inlet valve or a frozen dispenser tube stops the flow; David tests the valve pressure and clears the line.
Fridge running constantly
Dirty condenser coils, a stuck damper, or a weak door gasket keeps the fridge from cycling off; David finds the cause and restores normal cooling.
Control panel error or blank display
A failed dispenser control board or user-interface board on the door blanks the panel; David replaces the board.
Door not sealing tight
A torn or warped KitchenAid door gasket lets humidity and heat in; David fits a factory gasket.
Sound like yours?
Tell David what your refrigerator is doing
Why it breaks
What actually goes wrong
Your KitchenAid refrigerator was built to hold temperature precisely, so warm milk, a frost-packed freezer, or a dead ice maker means a specific part has failed; it's no mystery.
KitchenAid's sealed system runs hard in Florida heat, and Broward's hard water is the ice maker's worst enemy: mineral scale clogs the fill tube, inlet valve, and dispenser lines. Summer power surges knock out the main and defrost control boards, while humidity swells door gaskets and dust cakes the condenser coils. Most of these are single-part fixes.
What David checks
- Ice-maker module
- Evaporator fan motor
- Defrost control board
- Water inlet valve
- Main control board
- Defrost heater & bimetal
- Door gasket
- Condenser coils
- Compressor start relay
Honest diagnosis
David explains what failed
Reviews
What customers say about David
David was able to come the same day to fix my fridge water dispenser and made it easy. Friendly, honest, and efficient. Explained the issue and had it working in no time. Highly recommend.
Highly recommend! He was incredibly responsive and reliable, and was able to come out quickly to fix my dishwasher. He clearly explained the issue and walked me through the repair process so I understood exactly what was going on. What really stood out was that he went above and beyond by giving me helpful tips on ongoing maintenance for my other appliances to help prevent future problems. Honest, knowledgeable, and professional. I wouldn’t hesitate to call him again.
I can’t thank David enough for fixing my oven. My neighbor recommended him, and I’m so glad they did. He was quick to respond, explained exactly what was going on, ordered the parts, and got everything working again. Reliable, easy to work with, and clearly knows what he’s doing. Highly recommend.
Other KitchenAid appliances
FAQ
Common questions about refrigerator repair
Do you repair KitchenAid built-in and French-door models?
Yes. David repairs both the panel-ready built-in columns and the freestanding French-door units.
Is it worth repairing a KitchenAid, or should I replace it?
KitchenAid fridges are premium units, and most failures come down to a single part (a fan, board, or valve), which costs far less than a new fridge. David gives you an honest call, with no pressure to buy anything.
Why is my KitchenAid freezer frosting over?
It's almost always a failed defrost heater, bimetal thermostat, or defrost control board. David tests the whole defrost circuit and replaces the exact part that failed.
Service area
16 Broward County cities
David is based in Fort Lauderdale and works in the cities below. Not sure if you're in range? Call and ask.
Request a repair
Get your refrigerator looked at
Leave your name and number and David will call you back to set up a visit. In a hurry? Calling is the fastest way to reach him.
(954) 895-54599 AM to 6 PM, five days a week
5.0Based on Google Reviews