KitchenAid repair
KitchenAid dishwasher repair in Broward County
Standing water, leaks, dirty dishes or a blinking error code. Built-in and drawer dishwashers from every major brand.
- Owner-operated
- Insured
- All major brands
Common problems
Sound familiar?
These are the dishwasher problems David sees most often in Broward County, and what usually causes them.
Won't drain, standing water
Standing water can come with an F9E1 long-drain code. The cause can be a clogged filter, a kinked or clogged drain hose, a blocked disposer connection, or a clogged or failed drain pump. David finds the blockage and clears it, or replaces the pump if it failed.
Clean light keeps flashing
KitchenAid flashes the clean light to signal a stored fault; David reads the code and replaces the failed part.
F8E4 overfill or water on the floor
F8E4 means the float switch found water in the base pan under the tub. The water can come from a leaking hose connection, too many suds, or an inlet valve stuck open. David finds the source, fixes it, and clears the code.
Dead, no lights, no power
A power surge has blown the thermal fuse or damaged the control board; David tests both and gets the dishwasher powering up again.
Won't start when latched
A worn door latch assembly isn't telling the control board the door is closed; David replaces the latch so the dishwasher starts again.
Dishes come out wet
A failed heating element won't dry the load; David tests the element and replaces it so the dishes come out dry.
Loud grinding or humming
It's usually glass or debris in the wash pump/motor, or worn bearings; David clears the sump and replaces the motor if needed.
Detergent pod won't dispense
A broken detergent dispenser latch or a failed wax motor keeps the pod trapped; David replaces the dispenser so the soap releases at the right time.
Dishes still dirty after cycle
It's usually a weak wash pump, clogged spray arms, or hard-water scale; David clears the arms and checks the wash pump pressure.
Cycle runs forever, won't advance
A faulty thermistor stops the control board from seeing that the water has reached temperature; David tests the sensor, then reprograms or replaces the board.
Sound like yours?
Tell David what your dishwasher is doing
Why it breaks
What actually goes wrong
KitchenAid dishwashers are premium Whirlpool-platform machines, so their faults are specific: F8E4 overfill trips, F9E1 long-drain errors, a clogged drain pump, or a dead wash motor.
Broward's hard water is a common culprit: mineral scale clogs spray arms, coats the heating element, and can make the inlet valve stick open, which can end in an F8E4 overfill error. Summer power surges kill control boards and thermal fuses. Everyday wear breaks door latches and dispensers, while food debris and glass block the drain path or jam the drain pump. A blocked drain shows up as an F9E1 long-drain fault.
What David checks
- Drain pump
- Wash pump/motor
- Float switch
- Water inlet valve
- Door latch assembly
- Heating element
- Detergent dispenser
- Control board
- Thermal fuse
Honest diagnosis
David explains what failed
Reviews
What customers say about David
Highly recommend! He was incredibly responsive and reliable, and was able to come out quickly to fix my dishwasher. He clearly explained the issue and walked me through the repair process so I understood exactly what was going on. What really stood out was that he went above and beyond by giving me helpful tips on ongoing maintenance for my other appliances to help prevent future problems. Honest, knowledgeable, and professional. I wouldn’t hesitate to call him again.
David came by to fix my dishwasher and did an awesome job. It had been leaking and not draining for weeks and thanks to him it’s working perfectly now. He explained in a simple way, fixed it quickly and was very honest about it. I am glad my friend recommended him. If any of your appliances are giving you trouble, just call David
I can’t thank David enough for fixing my oven. My neighbor recommended him, and I’m so glad they did. He was quick to respond, explained exactly what was going on, ordered the parts, and got everything working again. Reliable, easy to work with, and clearly knows what he’s doing. Highly recommend.
Other KitchenAid appliances
FAQ
Common questions about dishwasher repair
What does F8E4 mean on my KitchenAid dishwasher?
It means the float switch detected water in the base pan under the tub, from an overfill or a leak. Possible sources are a leaking hose connection, too many suds from the wrong detergent, or an inlet valve stuck open. An unplugged float switch can also set it off.
My KitchenAid clean light keeps flashing. What's wrong?
That's a stored fault on KitchenAid's control platform, often a heating, drain, or fill problem. David reads the code on site and replaces the failed part.
Can you fix a KitchenAid that won't drain?
Yes. Standing water can come from a clogged filter, a kinked or clogged drain hose, a blocked disposer connection or air gap, or a clogged or failed drain pump. The control may show an F9E1 long-drain code. David finds the cause and clears it, or replaces the pump if it failed.
Do you work on built-in KitchenAid dishwashers?
Absolutely. David handles KitchenAid dishwasher repair on all built-ins, including panel-ready models.
Service area
16 Broward County cities
David is based in Fort Lauderdale and works in the cities below. Not sure if you're in range? Call and ask.
Request a repair
Get your dishwasher looked at
Leave your name and number and David will call you back to set up a visit. In a hurry? Calling is the fastest way to reach him.
(954) 895-54599 AM to 6 PM, five days a week
5.0Based on Google Reviews