Maytag repair
Maytag dishwasher repair in Broward County
Standing water, leaks, dirty dishes or a blinking error code. Built-in and drawer dishwashers from every major brand.
- Owner-operated
- Insured
- All major brands
Common problems
Sound familiar?
These are the dishwasher problems David sees most often in Broward County, and what usually causes them.
Standing water won't drain
A clogged or seized drain pump leaves water in the tub; David clears the pump or replaces it.
Dishes come out dirty
A worn wash pump motor or a blocked chopper cuts spray pressure; David restores circulation and cleans the filter.
Won't start or latch
A failed door latch assembly breaks the safety switch circuit, so the cycle never begins; David replaces the latch.
Not filling with water
A stuck inlet valve or a tripped float switch keeps water out; David tests both and fixes the one at fault.
Dishes stay wet and cold
A burned-out heating element means no heated dry and no hot rinse; David tests the element and replaces it.
Loud grinding noise
Broken glass or debris jammed in the chopper and filter area rattles the wash pump; David clears the jam and inspects the pump.
Control panel unresponsive
A failed control board or thermal fuse kills the buttons and lights; David tests both and repairs the one at fault.
Clean light blinks repeatedly
Flashing status lights signal a drain or heater fault that the control has detected; David reads the pattern and fixes the fault.
Leaking onto the floor
A cracked door gasket or a loose pump hose lets water escape the tub; David replaces the gasket or secures the hose to stop the leak.
Cycle stops mid-wash
A faulty float switch or an overheating wash motor halts the program; David tracks down the cause and fixes it.
Sound like yours?
Tell David what your dishwasher is doing
Why it breaks
What actually goes wrong
Maytag dishwashers are built tough, but drain pumps clog, door latches fail, and wash motors give out. Broward's hard water only speeds up that wear.
Broward County's hard water is the biggest culprit: mineral scale coats the heating element, gums up the inlet valve, and clogs the filter and chopper. Food debris and glass shards jam the drain pump, while constant use wears the wash motor and door latch. Power surges also stress the control board.
What David checks
- Drain pump
- Wash pump/motor
- Door latch assembly
- Water inlet valve
- Float switch
- Heating element
- Chopper & filter
- Control board
- Door gasket
Honest diagnosis
David explains what failed
Reviews
What customers say about David
Highly recommend! He was incredibly responsive and reliable, and was able to come out quickly to fix my dishwasher. He clearly explained the issue and walked me through the repair process so I understood exactly what was going on. What really stood out was that he went above and beyond by giving me helpful tips on ongoing maintenance for my other appliances to help prevent future problems. Honest, knowledgeable, and professional. I wouldn’t hesitate to call him again.
David came by to fix my dishwasher and did an awesome job. It had been leaking and not draining for weeks and thanks to him it’s working perfectly now. He explained in a simple way, fixed it quickly and was very honest about it. I am glad my friend recommended him. If any of your appliances are giving you trouble, just call David
I can’t thank David enough for fixing my oven. My neighbor recommended him, and I’m so glad they did. He was quick to respond, explained exactly what was going on, ordered the parts, and got everything working again. Reliable, easy to work with, and clearly knows what he’s doing. Highly recommend.
Other Maytag appliances
FAQ
Common questions about dishwasher repair
Why won't my Maytag dishwasher drain?
It's usually a clogged or failed drain pump, or debris caught in the chopper.
My Maytag starts but the dishes are still dirty. Why?
That points to a weak wash pump/motor or a blocked filter cutting spray pressure.
My Maytag dishwasher won't turn on at all. Is it the board?
Often it's the door latch safety switch, not the board. David tests the latch, control board, and thermal fuse to find the real cause before he replaces anything. It's an honest diagnosis with no upsell.
Why is there water sitting in the bottom after every cycle?
A partly clogged drain pump or a float switch fault leaves standing water. It's a common Maytag issue with Broward's hard water; David clears the clog and makes sure the tub drains fully.
Service area
16 Broward County cities
David is based in Fort Lauderdale and works in the cities below. Not sure if you're in range? Call and ask.
Request a repair
Get your dishwasher looked at
Leave your name and number and David will call you back to set up a visit. In a hurry? Calling is the fastest way to reach him.
(954) 895-54599 AM to 6 PM, five days a week
5.0Based on Google Reviews