Frigidaire repair
Frigidaire washer repair in Broward County
Won't drain, won't spin, or shakes across the floor. Top-load and front-load washers from every major brand.
- Owner-operated
- Insured
- All major brands
Common problems
Sound familiar?
These are the washer problems David sees most often in Broward County, and what usually causes them.
E21: slow drain
A clogged drain pump, filter debris, or a kinked drain hose trips E21 on Frigidaire front-loaders; David clears the blockage and tests the drain.
E11: won't fill
A stuck water inlet valve or clogged inlet screens throw E11 on Frigidaire front-loaders; David replaces the valve and checks that the tub fills.
Door locked, won't open
A failed door lock assembly or a trapped-water fault keeps the door latched shut; David releases it and replaces the lock.
Loud grinding on spin
A worn rear tub bearing and spider arm cause the roar; David presses in new bearings and seals.
Tub won't spin or agitate
A snapped drive belt or a failed motor coupling stops the tub from turning; David replaces the belt or coupling and tests the spin.
Dead panel, no response
A surge-damaged main control board leaves the buttons unresponsive; David tests the board and replaces it.
Leaking from the door
A torn door boot gasket or a bad tub seal lets water drip onto the floor; David reseals the front-load boot.
Mold or mildew smell
Biofilm trapped in the door boot and detergent drawer causes the smell; David deep-cleans or replaces the gasket.
Clothes still soaked
A weak spin from a failing drain pump or a worn bearing leaves loads dripping; David restores full spin speed.
Walks or bangs violently
Broken suspension springs or shock absorbers let the tub slam; David replaces the dampers and levels the washer.
Sound like yours?
Tell David what your washer is doing
Why it breaks
What actually goes wrong
Frigidaire washers fail in their own predictable ways: slow-drain codes (E21 on front-loaders, E2 on top-loaders) from a clogged pump or drain hose, long-fill codes (E11 on front-loaders, E1 on top-loaders) from a stuck inlet valve or clogged screens, worn tub bearings that roar on spin, and that stubborn mold smell around a front-loader's door boot. No upsells, no guessing.
Broward's hard water scales up the inlet valve and pump, which leads to long-fill and slow-drain codes (E11 and E21 on front-loaders). Summer heat and humidity feed mold in front-load door boots. Power surges from afternoon storms fry the main control board, and years of unbalanced loads wear out the tub bearings, shock absorbers, and drive belt until the spin gets loud or stops entirely.
What David checks
- Drain pump & filter
- Water inlet valve
- Door lock assembly
- Rear tub bearing
- Drive belt & pulley
- Main control board
- Door boot gasket
- Shock absorbers
- Pressure switch
Honest diagnosis
David explains what failed
Reviews
What customers say about David
Highly recommend! He was incredibly responsive and reliable, and was able to come out quickly to fix my dishwasher. He clearly explained the issue and walked me through the repair process so I understood exactly what was going on. What really stood out was that he went above and beyond by giving me helpful tips on ongoing maintenance for my other appliances to help prevent future problems. Honest, knowledgeable, and professional. I wouldn’t hesitate to call him again.
I can’t thank David enough for fixing my oven. My neighbor recommended him, and I’m so glad they did. He was quick to respond, explained exactly what was going on, ordered the parts, and got everything working again. Reliable, easy to work with, and clearly knows what he’s doing. Highly recommend.
David was on time, friendly, professional and knowledgeable. He knew exactly how to fix the burner on our stovetop, and gave us some helpful advice for the future.
Other Frigidaire appliances
FAQ
Common questions about washer repair
What does E21 mean on my Frigidaire washer?
On a front-loader, E21 means the water is draining too slowly, usually because of a clogged drain pump or drain hose.
Why won't my Frigidaire washer fill with water?
On a front-loader, an E11 code points to a long fill, often from a stuck water inlet valve or clogged inlet screens. On a top-loader, the same problem shows as E1.
Can you get my locked Frigidaire door open?
Yes. A failed door lock or trapped water keeps the door latched. David safely releases it, drains the tub, and replaces the lock so your load comes out.
How do I get rid of the mold smell?
Front-load Frigidaires trap biofilm in the door boot and drawer. David deep-cleans or replaces the gasket and shows you how to keep it dry.
Service area
16 Broward County cities
David is based in Fort Lauderdale and works in the cities below. Not sure if you're in range? Call and ask.
Request a repair
Get your washer looked at
Leave your name and number and David will call you back to set up a visit. In a hurry? Calling is the fastest way to reach him.
(954) 895-54599 AM to 6 PM, five days a week
5.0Based on Google Reviews